Jump to navigation
Loading Tools
52 Items
-
- Price: $120.00
- Description: Vintage Lyman ideal die set built for the tru-line Jr press in 38 special. This complete set of dies is in its original box as shipped from Lyman. The box contains the decapper and resizing, expandi...
-
- Price: $295.00
- Description: This 10 GA primer extractor and primer tool is in new condition in the original box with 99% gold paint and beautiful wood grip showing "Patented April 6, 1875" stamping clearly. The box shows light ...
-
- Price: $125.00
- Description: This 1894 tool is marked .30 Gov. S.R. for short range. This tool is intended to seat a light short bullet in a 30-40 Krag case. Tool is in very good condition retaining 80% blue finish. No decappi...
-
- Price: $85.00
- Description: This is a vintage Winchester Model 1882 reloading tool for your 38 WCF (38-40) cartridges. Tool is missing the decapping pin. Metal surfaces retain about 30% thinning and fading original blue finish w...
-
- Price: $250.00
- Description: This brass and iron tool has an adjustable shell holder marked "14, 18, 24, 28, and 32. this base plate springs on center screw with a lockscrew all held by lower handle. Center handle has decapping...
-
- Price: $175.00
- Description: This unusual tool is stamped 88 on one handle and by decapping chisel. The shell holder fits 8 X 57 perfectly and is marked "27777". The handle is also marked "St. 2". Tool retains 95% blue with som...
-
- Price: $345.00
- Description: These two tools are made of turned maple with brass internal parts. First is a shell funnel marked "12" on center band with a slot for the pin. Second is a shell roll crimper, also marked "12" on ha...
-
- Price: $110.00
- Description: Tool retains about 25% fading original blue with mostly a brown patina and some oxidation staining.
-
- Price: $115.00
- Description: Tool is a mix of strong original blue on the die and a rust/brown patina on the balance of the tool with scattered oxidation. There are about a dozen small impact marks in the address block....
-
- Price: $115.00
- Description: Tool retains about 10% fading original blue in the protected and sheltered areas with the balance gray with scattered oxidation and light corrosion. ...
-
- Price: $150.00
- Description: Vintage tool in a hard to find caliber. Tool retains about 50% finish that has turned to a gray/brown patina and has scattered small areas of fine to light pitting....
-
- Price: $75.00
- Description: Tool has been heavily cleaned and the knurling on the die is nearly gone. The finish is mostly a gun metal gray patina. Would make a representative example in a beginning tool collection....
-
- Price: $95.00
- Description: This tool has faded to a brown patina with older oxidation staining and light rust. Not as commonly seen as the later 1882 variations....
-
- Price: $65.00
- Description: This tool retains a rust brown patina with numerous dings and impact marks over the years. Handles still pivot smoothly....
-
- Price: $125.00
- Description: Nickel plated Ideal mold and tool for the 38-56 cartridge. Tool retains about 90% thinning and fading coverage with light rust bleeding through. Tool is clearly marked and the cavity is fairly clean a...
-
- Price: $150.00
- Description: This tool retains about 85% original blue mixed with some oxidation staining. Should display well with your collection. ...
-
- Price: $795.00
- Description: Extremely scarce bullet mold for the Burnside Carbine. Unmarked it will cast a single conical shaped bullet. There is moderate to heavy corrosion on the handles, sprue and the cavity. Mold opens and c...
-
- Price: $295.00
- Description: This loading tool box remains in good condition with tape on some corners, glue repairs, and soiling. Top label remains fully legible. The box bottom is missing one side and one end. The end label ...
-
- Price: $40.00
- Description: This three die set remains in excellent condition with bright clean interiors. They come with instructions in a green RCBS box. No shell holder is present. ...
-
- Price: $40.00
- Description: This two die set comes complete with shell holder. Dies are clean and should work well.
-
- Price: $75.00
- Description: This 30-06 tool set produces loaded ammo of high quality. the sizing die neck sizes the case, fired brass from the same gun will work best. Comes complete with instructions and storage box. ...
-
- Price: $95.00
- Description: This interesting adjustable powder measure is double stamped "Gold Dust Smokeless Powder Co" at top. This unusual measure is graduated in "Grains" (30-60) and was intended for use with only God Dust ...
-
- Price: $95.00
- Description: This bench mounted loading tool is from the late 1940's and remains in very good condition with 80% black paint finish and light oxidation on bright parts. This tool was a significant improvement ove...
-
- Price: $55.00
- Description: This box is from the 1925 to 1930 period and remains in very good condition with some scuffing and part of label reglued to box. Box contains a clean "How to cast Bullets" full page insert that would...
-
- Price: $105.00
- Description: This bench mounted crimper is in excellent condition with over 75% original gold paint. Most loss is on left side of body. The wood handles are sound and look great with a nice oil finish. A much be...
-
- Price: $60.00
- Description: Two dies in two boxes RCBS #14430 neck sizer die and RCBS #14438 seating die. No shell holder is present. Both are in excellent condition. ...
-
- Price: $155.00
- Description: This 12 gauge shell crimper has a reversable head for square or round crimp. Tool is in excellent condition with 95% black paint and strong case colors on crimper. The wood handles show light use. ...
-
- Price: $75.00
- Description: This old Ideal Box wears a yellow label with a very nice cut showing dipper, lead pot, stove cover and bullets. Box is headed "Ideal" with "Manufactured by the Lyman Gun Sight Corporation Middlefield...
-
- Price: $80.00
- Description: This Ideal box carried an "Improved Single Mold with interchangeable blocks." Top label shows a great cut of a single cavity mold with handles. Label shows "Maufacture by Lyman Gun Sight Corporation...
-
- Price: $95.00
- Description: This interesting tool retians about 80% bright fire blue finish. The driver heads are square cut and wrench has slight shoulders inside cutout. ...
-
- Price: $65.00
- Description: this 12.5 inch long ladle is marked "Hollands Made in U.S.A. 3" on back of handle. Cup is about 3 inches across with a pour spout on each end. These plumbers ladles are very popular among bullet cas...
-
- Price: $295.00
- Description: This buff 7 3/4 X 3 1/4 X 1 1/4 inch box wears a yellow label reading "Crandall Precision Reloading Tools Manufactured by G.B. Crandal, Woodstock, Ontario Cal. 45 Colt Auto Pistol" box contains a prim...
-
- Price: $95.00
- Description: This micrometer is stamped "made in Germany" with no other makers mark. Features include adjustable anvil, ratchet stop tightener, lock nut and fraction conversion tables on body. Exterior shows sta...
-
- Price: $195.00
- Description: This odd crimper is built of spring steel. The loaded case slips into crimper with bullet protruding. Squeezing tool forms crimp. The only marking on this item is "8m/m" on one handle. Bright tool ...
-
- Price: $60.00
- Description: One small round opened box of Gaupillat & Cie 16 gauge brass firing pins for loading 16 gauge pinfire shotshells. They measure .04" wide and .074" long. Box holds fifty pins and shows light soiling ...
-
- Price: $35.00
- Description: This old tool fits a .220 inch wide nipple. Wrench is mounted on a large turned wood handle. A great item to display with an old gun or for the tool collector. ...
-
- Price: $45.00
- Description: This measure has a spring loaded plunger attached to a ring at top of cavity that levels the powder evenly. The measure is adjustable with a screw to tighten bottom cup. Marked "Grammes Poudre" on ...
-
- Price: $45.00
- Description: This little reamer will clean residue from a primer pocket in jig time. A very handy tool for any shotshell reloader, this one appears old, with dark patina on brass fitting and lathe marks on handle...
-
- Price: $100.00
- Description: This 1882 tool is in very good condition with a dark patina, many marks from use and scattered oxidation. Chambered for 45-60, this tool features a Berdan decapper and improved extraction from the se...
-
- Price: $95.00
- Description: This crimper features a wad setter and will work on two inch shells. Painted gold with turned wood handles and brass roller, this retains 70% paint and will look great on display....
-
- Price: $85.00
- Description: This #3 is missing sizing plunger and pin. Features include a blued double adjustable chamber and nickel finished handles. Handles retain 90% nickel with a little dark spotting. Chamber shows 40% b...
-
- Price: $125.00
- Description: This iron bottom pour casting ladle is marked :Monroe's/Patent/June 14/1864". this ladle has an interesting pine handle with a small area of sapwood showing wear. Metal has a dark aged patina. Spou...
-
- Price: $150.00
- Description: This tool is in excellent condition with just a few dings and some light scratches on 60% fading blue. The decapping pin is not present. A great display item to show with an 1886 Winchester, this to...
-
- Price: $50.00
- Description: This measure is marked "24 grs Infallible", struck off "26 Infallible settled" and struck off on handle. The bottom of the cup is marked "Laflin & Rand Infallible 24-26 Grain". This measure is in gr...
-
- Price: $50.00
- Description: This little funnel is for dropping powder into cases. Made of steel with soldered edges this nice funnel will add to any loading tool display. ...
-
- Price: $50.00
- Description: This empty box wears a bright yellow label with black lettering. This label has a Lyman callout so would date to 1925-35 period. A great display item for the gun room. ...
-
- Price: $75.00
- Description: This empty box is for an Ideal dipper. The yellow label has a Lyman callout so would date post 1925. The label has an advertisement for Ideal dipper, Pot and cover for 50 cents each. This box is pe...
-
- Price: $195.00
- Description: This tool is in very good condition showing traces of original black paint in protected areas. The decapping channel is stamped "40". The chisel appears lightly sharpened and capper has a concave fac...
-
- Price: $90.00
- Description: This sizer comes in a very good condition original orange and black box. Die and punch are used but are in excellent condition and very usable. This is a great collectible display item and would loo...
-
- Price: $295.00
- Description: This ladle measures 21 1/2" over-all length including the wood handle with a nice fine spout for casting bullets. The piece is overall in relic condition both wood and metal. This piece is probably a...
-
- Price: $60.00
- Description: A cleverly made steel tool with the De Cap pin missing. A replacement should be easy to fabricate. For 12 Ga. shells. A nice piece of Americana. Reloading tool....
-
- Price: $50.00
- Description: Two EMPTY boxes for the Ideal Improved Mold with interchangeable blocks. Bullet numbers 429220 and 429421. Nice display boxes or for the near new tool. ...
